HC-05 Wireless Bluetooth Transceiver Module HC05 Bluetooth receiver Arduino
10 in stock
₨950.00
10 in stock
The Bluetooth Module HC05 is an easy to use Bluetooth SPP (Serial Port Protocol) module, designed for transparent wireless serial connection setup. The HC-05 Bluetooth Module can be used in a Master or Slave configuration, making it a great solution for wireless communication. This serial port bluetooth module is fully qualified Bluetooth V2.0+EDR (Enhanced Data Rate)3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and with AFH (Adaptive Frequency Hopping Feature).
Bluetooth Module HC-05
The Bluetooth module HC-05 is a MASTER/SLAVE module. By default the factory setting is SLAVE. The Role of the module (Master or Slave) can be configured only by AT COMMANDS. The slave modules cannot initiate a connection to another Bluetooth device, but can accept connections. Master module can initiate a connection to other devices. The user can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project, etc.
Hardware Features
Typical -80dBm sensitivity.
Up to +4dBm RF transmit power.
3.3 to 5 V I/O.
PIO(Programmable Input/Output) control.
UART interface with programmable baud rate.
With integrated antenna.
| Features: Operating voltage: 3.3V Working current: matching for 30 MA, matching the communication for 8 MA. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards. Potter default rate of 9600, the user can be set up. With computer and bluetooth, bluetooth adapter, PDA, seamless connection equipment. Dormancy current: no dormancy. Input power supply 3.3~6V, Prohibit more than 7V. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC, GND, TXD, RXD foot for the Bluetooth With “Re-search” button (ON/OFF/WAKE foot for it , external MCU out input “High level” can control module to re-search) Compatible with bluetooth master module”, slave module” or master-slave (whole) module. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. No “Automatically prevent power supply peversing func”, so please correctly connect power supply |
There are no reviews yet.