Dark Light

IBT2 Motor Driver H-Bridge BTS7960 43A High Power Module

Availability:

Out of stock


The 43a motor driver BTS7960 has a low on-resistance of 16mΩ, which helps to minimize power dissipation. The BTS7960 43A High Power Motor Driver Module can handle up to 43A of peak current and 36A of continuous current.

1,450.00

Out of stock

The IBT2 motor driver is a H-Bridge module that uses two BTS7960 chips to control DC motors. IBT2 BTS7960 motor driver module can handle up to 43A of current and has a wide voltage range of 6V to 27V. The IBT2 H-Bridge motor driver is easy to use and can control using a variety of microcontrollers, including Arduino, PIC, and AVR.

The IBT2 Motor Driver is a high-current H-bridge driver module that can use to control DC motors, stepper motors, and other types of motors. It is based on the Infineon BTS7960 chip, which is a high-performance MOSFET that can handle up to 43A of current. The IBT2 Motor Driver has a number of features that make it ideal for a variety of applications.

The BTS7960 is a fully integrated high current half-bridge driver from Infineon Technologies. It is a monolithic device that consists of a p-channel high side MOSFET, an n-channel low side MOSFET, and a driver IC. The BTS7960 is designed for use in motor drive applications and can be used to drive DC motors, stepper motors, and other types of motors.

BTS7960 IBT2 43A H-Bridge Motor Driver Module the drive uses an H-bridge driver module that composed by Infineon power drive chip BTS7960, with overheating and overcurrent protection.

The BTS7960 is a 43A Motor Driver which uses two high current half bridge Infineon BTS 7960 chip for motor drive applications. Interfacing to a microcontroller is made easy using this driver which features current sensing, slew rate adjustment and protection against over temperature, overvoltage, under voltage, Over current and short circuit.

Features : –

IBT2 motor driver is a fully integrated high current H bridge module for motor drive applications. Interfacing to a microcontroller is made easy by the integrated driver IC which features logic level inputs, diagnosis with current sense, slew rate adjustment, dead time generation and protection against overtemperature, overvoltage, under voltage, overcurrent and short circuit.

The BTS7960 has a number of features that make it a good choice for motor drive applications, including:

  • High current: The BTS7960 can handle up to 43A of peak current and 36A of continuous current.
  • Low on-resistance: The BTS7960 has a low on-resistance of 16mΩ, which helps to minimize power dissipation.
  • Low quiescent current: The BTS7960 has a low quiescent current of 7µA, which helps to extend battery life.
  • Integrated driver IC: The BTS7960 includes an integrated driver IC that provides logic level control, current sense, slew rate limiting, dead time generation, and protection against overtemperature, overvoltage, undervoltage, overcurrent, and short circuit.

IBT2 Motor Driver Specifications : –

BTS7960 43A provides a cost optimized solution for protected high current PWM motor drives with very low board space consumption. The 43a motor driver IBT-2 H-bridge module is an inexpensive, high power motor driver based on two BTS7960 chips.

If you are looking for a high-performance, low-cost, and easy-to-use motor driver, the IBT2 H-Bridge is a great option.

Here are some of the specifications of the IBT2 H-Bridge:

  • Input voltage: 6V to 27V
  • Maximum current: 43A
  • Control input level: 3.3V to 5V
  • Control mode: PWM or level
  • Working duty cycle: 0 to 100%
  • Over-voltage lockout
  • Under-voltage shutdown
  • Board size (L x W x H): 50mm x 50mm x 43mm
  • Weight: ~66g

IBT2 Motor Driver Applications : –

The IBT2 H-Bridge is a great option for a variety of applications. It is easy to use, low-cost, and can handle high current. If you are looking for a motor driver that can handle high current and is easy to use, the IBT2 H-Bridge is a great option.

Here are some of the things you can do with the IBT2 H-Bridge:

  • Control DC motors
  • Control stepper motors
  • Build robots
  • Create DIY projects
  • And more!
Package : –

1 x BTS7960B IBT2 BTS7960 43A High Power Motor Driver Module

SKU: IBT-2 Category:
Weight 0.1 kg
Dimensions 6 × 6 × 6 cm

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “IBT2 Motor Driver H-Bridge BTS7960 43A High Power Module”

There are no reviews yet.