Miscellaneous Sheilds and Modules
TP 4056 Charging Module | 1A 18650 Lithium battery Charger Module Micro USB | TP4056 IC Module With Battery Protection BMS – 3.7V
Availability:
47 in stock
₨80.00
47 in stock
- Using the module:Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module
- Connect cell to charge to B+/B- pads on the right-hand side of the module.
- A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side
- Important! Disconnect load when charging
- The red LED indicates charging in progress, the green LED indicates charging has finished.
- Never charge your battery at a rate greater than 1C.
- 2. It is better thanthe charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, acurrent of 400mAh is enough.
- 3. The connection wire should not be too thick.
- 4. Make sure the connect point is good.
- 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is a protection function, auto-subtract the charging current to avoid burn damage to thechip.
- 6. NO Reverse polarity.Features :Led indicator: red is charging Green is fully charged.
- Current Protection: Yes
- Inversed polarity: NO.
- Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
- Fully machinery automated processing, all patch parts manufacturing.
There are no reviews yet.